1. 高性能结构材料（高铁轨道、飞机起落架、汽车用钢、航空航天器高强紧固件）

2. 极端环境（高低温、腐蚀）下的耐磨抗疲劳材料

3. pc-LED发光材料、减磨耐磨镀层材料

4. 核反应堆耐事故包壳材料

近五年在研项目：

1. 国家自然科学基金委员会, 重点项目, 基于多尺度定量表征的BCC高熵合金高温辐照变形损伤机理与强韧化方法研究, 290万元

2. 国家自然科学基金委员会, 面上项目, 镁合金中锥面位错激活机制与增韧的多尺度研究, 62万元

3. 国家自然科学基金委员会, 青年科学基金项目, 基于薄片状碳化钒析出的贝氏体钢轨钢复相组织调控及耐磨特性研究, 30万元

4. 四川省科学技术厅, 杰出青年基金, 汽轮机转子钢服役环境超长寿命疲劳行为研究, 20万元

5. 四川省科学技术厅, 面上基金, 航空发动机叶片超长寿命疲劳损伤修复与仿生延寿研究, 20万元

6. 四川省科学技术厅, 青年基金, 多尺度亚结构对中碳贝氏体复相钢强韧性及滚动接触疲劳行为的影响机理研究, 10万元

7. 四川省科学技术厅, 重点项目, 碳化物弥散强化细晶FeCrAl基合金的制备及力学性能和抗辐照机理研究, 50万元

[1] Qiangguo Li, Wandong Li, Mingwei Li, Minghua Su, Zhihua Hu, Hongbo Ma, Zhengyun Wang, Tong Li, Yanan Zhang. Improving the high stress abrasive wear resistance of medium carbon quenched and partitioned bainitic steel by controlling the phase transformation sequence. Journal of Materials Research and Technology, 38 (2025) 2808–2819.

[2] Minghua Su，Jianhua Zhao, Cheng Gu, Zhengyun Wang, Qiangguo Li, Xiaolong Ran. Temperature-dependent effects of surface finishing on oxidation behavior of Fe–18Cr–8Ni austenitic steel. Journal of Materials Research and Technology, 37 (2025) 5344–5359.

[3] Qiangguo Li*, Ming Ni, Weigang Huang. Microstructure and mechanical properties of electroless Ni–P–Si3N4–TiN composite coatings. Materials Science and Technology. 2024.

[4] Cheng Chen, Chengyong Liu, Xingwei Xu, Qingfang Yuan, Changhua Chen, Qingxian Li, Zhixing Guo, Qiangguo Li, Qianbing You, Ji Xiong, Junbo Liu. International Journal of Refractory Metals and Hard Materials, 120 (2024) 106564.

[5] Li Dawei, Chen Lihai, Mao Yuqiang, Wei Yandong, Wang Xinghua, Rong Pengcheng, Li Qiangguo, Li Wandong. The improved strength and fracture mechanism of additive manufactured Ti-6Al-4 V alloys compared with corresponding as-rolled alloys. Journal of Materials Research, 2024.

[6] Qiangguo Li*, Yanan Zhang, Hong Luo. Impact abrasive wear behaviour of the multiphase microstructure in a medium carbon quenched and partitioned bainitic steel. Wear, 518-519 (2023) 204644.

[7] Qiangguo Li*, Yanan Zhang, Hong Luo. Fatigue crack propagation behavior of multiphase microstructure in a quenched and partitioned medium-carbon bainitic steel. Fatigue & Fracture of Engineering Materials & Structures, 2023, 46: 325-340.

[8] Yangbing Han, Jiarui Wu, Qiangguo Li* Xiangjun Yang, Tao Li a, Qingyuan Wang, Xiaoqiang Wu. Palladium supported on NiFe layered double hydroxide as an effective electrocatalyst for methanol electro-oxidation. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 669 (2023) 131497.

[9] Xiaojun Chen, Qiangguo Li*, Xiaodong Zhu, Qingyuan Wang, Xiaonan Liu, Xiaoqiang Wu. CuFe2O4 spinel synergize with Pd as a robust electrocatalyst for formate oxidation reaction. Applied Surface Science. 626 (2023) 157210.

[10] Wandong Li, Xinyu Luo, Xiaopi Geng, Ruichen Yang, Qiangguo Li*, Linhui Qiang, Shiqi Xu. Effects of Ag and Sc Addition on the Dynamic Recrystallization and Mechanical Properties of As-Extruded Mg-8Sn-4Al Alloys. Journal of Materials Engineering and Performance, 2023.

[11] Jia Liu, Xuguang An, Jing Zhang, Qingquan Kong, Qiangguo Li, Hui Wang, Weitang Yao, Qingyuan Wang. Microstructure, mechanical and corrosion properties of Co- and Cu-free AlxCrFeNi2.5Mo1-x high entropy alloys. Intermetallics, 153 (2023) 107775.

[12] Jia Liu, Jing Zhang, Qingquan Kong, Hui Wang, Wei Feng, Qiangguo Li, Ming Shu, Weitang Yao, Qingyuan Wang, Xuguang An. Effect of Al addition on microstructures and mechanical properties of AlxCrFeNi2.5Mo high entropy alloys. MRS Communications, (2023) 13:425-430.

[13] Li Wandong, Chen Lihai, Fan Zhidong, Zou MingWei, Li Xingquan, Qiao Lei, Tang Lisong, Li Qiangguo*. Age hardening response and microstructure of Mg–8Sn–4Al alloy with Ag, Sc addition. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 850 (2022) 143596.

[14] Qiangguo Li*, Yanan Zhang, Xuguang An. Microstructure and mechanical properties of a medium carbon bainitic steel treated by quenching and two step bainitic isothermal transformation below Ms. Ironmaking & Steelmaking, 2022, 49(3):268-275.

[15] Xin Li, Jian Mao, Xuefei Huang, Qiangguo Li, Weigang Huang. Effect of Ag addition on the characteristics of precipitates and improving age hardening response of Mg-6Bi alloy. Materials Characterization, 194 (2022) 112453.

[16] Dingbo Sun, Shuhai Huang, Chongmu Chen, Hui Wang, Xuguang An, Qiangguo Li, Xuefei Huang. Enhancement of the Mechanical Properties of a V–Ti–N Microalloyed Steel Treated by a Novel Precipitation-Quenching & Partitioning Process. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 53 (2022) 10: 3696-3712.

[17] Xiaoqiang Wu, Mingming Li, Qiangguo Li, Liang Qiao, Xiaonan Liu, Chao Lu, Xuguang An, Qingquan Kong, Weitang Yao, Weiyin Li, Zhiyang Xiang, Wei Feng, Qingyuan Wang. Highly active and durable FexCuyNi1-x-y FeOOH NiOOH CuO complex oxides for oxygen evolution reaction in alkaline media. International Journal of Hydrogen Energy, 47 (2022) 6691-6699.

[18] Xiaojun Chen, Jiarui Wu, Qiangguo Li, Xiaodong Zhu, Qingyuan Wang, Xiaoqiang Wu. Identifying high-efficiency Ni-based alloys_(oxy)hydroxides electrocatalysts for oxygen evolution reaction through a rapid screening method. International Journal of Hydrogen Energy, 47 (2022) 79: 33754-33764.

[19] Yuanqi Luo, Jing Zhang, Qingquan Kong, Qiangguo Li, Hui Wang, Xiaoqiang Wu, Weitang Yao, Qingyuan Wang, Xuguang An. Ultrafine lamellar-structured FeCrAl alloys with enhanced mechanical properties manipulated by Al1.8CrCuFeNi2 high-entropy alloys. Journal of Alloys and Compounds, 928 (2022) 167006.

[20] Haitao Chen, Qiang Li, Qiangguo Li, Zenghui Gao. Evolution behavior of the coherent vortex dipole inoceanic turbulence. Journal of the Optical Society of America A, 2022, 39.

[21] Dong Lang, Qiangguo Li, Xuefei Huang, Weigang Huang. Stacking fault energy and fcc→hcp transformation driving force in Fe-Mn-C-Cr-Si high manganese steels and experimental investigation. Materials Research Express. 8 (2021) 086507.

[22] Qiangguo Li*, Yanan Zhang, Wandong Li, Xuefei Huang, Weigang Huang. Improved Mechanical Properties of a Quenched and Partitioned Medium-Carbon Bainitic Steel by Control of Bainitic Isothermal Transformation. Journal of Materials Engineering and Performance, 2020, 29: 32-41.

[23] Qiangguo Li*, Yanan Zhang, Yaning Zhang, Haibo Liu, Haonan Ren, Yamei Zhong, Xuefei Huang, Weigang Huang. Influence of Sn and Nb additions on the microstructure and wear characteristics of a gray cast iron. Applied Physics A-Materials Science & Processing, 2020, 126: 282.

[24] Enzuo Liu, Qiangguo Li, Sufyan Naseem, Xuefei Huang, Weigang Huang. Effect of Isothermal Transformation Times below Ms and Tempering on Strength and Toughness of Low-Temperature Bainite in 0.53 C Bainitic Steel. Materials, 2020, 13, 2418.

[25] Qiangguo Li, Xuefei Huang, Weigang Huang. Fatigue property and microstructure deformation behavior of multiphase microstructure in a medium-carbon bainite steel under rolling contact condition. International Journal of Fatigue, 125 (2019) 381-393.

[26] Yanan Zhang, Xing Guo Yungui Chen, Qiangguo Li. Effect of compaction pressure on the densification microstructure and mechanical properties of Ti-1Al-8V-5Fe alloy based on TiH2 and HDH-Ti powders. Micro & Nano Letters, 14 (2019), 8: 906-910.

[27] Yanan Zhang, Qiangguo Li, Xing Guo, Yungui Chen. The sintering densification and microstructure evolutions of Ti 1Al 8V 5Fe alloy with Si additions. Materials and Manufacturing Processes. 2019.

[28] Chenghui Su, Qiangguo Li, Xuefei Huang, Weigang Huang. Effect of bainite microstructure during two-step quenching and partitioning process on strength and toughness properties of a 0.3%C bainitic steel. Journal of Iron and Steel Research International, 25 (2018) 2: 235-242.

[29] Qiangguo Li, Xuefei Huang, Weigang Huang. Strain hardening behavior and deformation characteristics of multiphase microstructure in a medium-carbon quenching and partitioning bainitic steel. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2017, 707: 199-206.

[30] Qiangguo Li, Xuefei Huang, Weigang Huang. EBSD analysis of relationship between microstructural features and toughness of a medium-Carbon quenching and partitioning bainitic steel. Journal of Materials Engineering and Performance, 2017, 26: 6149-6157.

[31] Qiangguo Li, Xuefei Huang, Weigang Huang. Microstructure and mechanical properties of a medium-carbon bainitic steel by a novel Quenching and Dynamic Partitioning (Q-DP) Process. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 662 (2016) 129-135.

[32] Yuyin Huang, Qiangguo Li, Xuefei Huang, Weigang Huang. Effect of bainitic isothermal transformation plus Q&P process on the microstructure and mechanical properties of 0.2C bainitic steel. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 678 (2016) 339-346.

2. 西安市高新区智库专家

3. International Journal of Materials Science and Applications编委